Metallicity in individual MMX chains

We present an ab initio study of the structural and electronic properties of the halogen-bridged MMX single polymer [Pt2(CH3CS2)4I]n and of various possible modifications of its sequence, in the framework of density functional theory. The computed band structure of the infinite regular polymer reveals a net metallic character; this evidence is compatible with the outcome of recent measurements done in the solid phase at room temperature. By taking the regular [Pt2(CH3CS2)4I]n polymer as our reference system, we analyzed the origin and the robustness of the metallic state along the chain with respect to a large set of geometrical and chemical perturbations of the subunits. In particular, we considered partial substitutions of the metal, halide, and dithiocarboxylate ligand subunits, as well as structural strain, defects, and magnetic effects. Our results demonstrate that the metallic character of single MMX chains is very resistant to a wide range of possible distortions that can occur in reality.     

A conducting coordination polymer based on assembled Cu9 cages

We report on a novel highly semiconducting 1D coordination polymer architecture obtained by the reaction of a Cu(II) salt with 2,2'-dipyridyldisulfide under microwave solvothermal conditions. This reaction proceeds with an unusual C-S and S-S bond cleavage of the 2,2'-dipyridyldisulfide ligand. The unprecedented architecture of this coordination polymer consists of a 1D chain formed by the assembling of Cu9 cluster cages. The electrical conductivity behavior of this novel material suggests new perspectives for the use of coordination polymers as electrical conducting materials.     

Electrical conductivity in platinum-dimer columns

Three new compounds of formula [Pt2(SSCR)4] (R = CH3, (CH2)4CH3, cyclohexyl) have been prepared and characterized by X-ray diffraction. Their crystal structures consist of one-dimensional linear chains formed by stacking of the dimetallic complexes in which the alkyl group on the dithioacetate modulates the intermetallic distances between dimetallic entities. Direct current electrical conductivity studies show that crystals of the three compounds behave as semiconductors and their conductivity values are directly connected to the intermolecular metal-to-metal distances. These experimental results are supported by density functional theory calculations.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

Theoretical and experimental studies of the spin trapping of inorganic radicals by 5,5-dimethyl-1-pyrroline N-oxide (DMPO). 3. Sulfur dioxide, sulfite, and sulfate radical anions

Radical forms of sulfur dioxide (SO(2)), sulfite (SO(3)(2-)), sulfate (SO(4)(2-)), and their conjugate acids are known to be generated in vivo through various chemical and biochemical pathways. Oxides of sulfur are environmentally pervasive compounds and are associated with a number of health problems. There is growing evidence that their toxicity may be mediated by their radical forms. Electron paramagnetic resonance (EPR) spin trapping using the commonly used spin trap, 5,5-dimethyl-1-pyrroline N-oxide (DMPO), has been employed in the detection of SO(3)(?-) and SO(4)(?-). The thermochemistries of SO(2)(?-), SO(3)(?-), SO(4)(?-), and their respective conjugate acids addition to DMPO were predicted using density functional theory (DFT) at the PCM/B3LYP/6-31+G**//B3LYP/6-31G* level. No spin adduct was observed for SO(2)(?-) by EPR, but an S-centered adduct was observed for SO(3)(?-)and an O-centered adduct for SO(4)(?-). Determination of adducts as S- or O-centered was made via comparison based on qualitative trends of experimental hfcc's with theoretical values. The thermodynamics of the nonradical addition of SO(3)(2-) and HSO(3)(-) to DMPO followed by conversion to the corresponding radical adduct via the Forrester-Hepburn mechanism was also calculated. Adduct acidities and decomposition pathways were investigated as well, including an EPR experiment using H(2)(17)O to determine the site of hydrolysis of O-centered adducts. The mode of radical addition to DMPO is predicted to be governed by several factors, including spin population density, and geometries stabilized by hydrogen bonds. The thermodynamic data supports evidence for the radical addition pathway over the nucleophilic addition mechanism.     

Multistep conformational interconversion mechanism of cyclododecane. A simple and fast analysis using potential energy curves

An ab initio and Density Functional Theory (DFT) study of the conformational properties of cyclododecane was carried out. The energetically preferred equilibrium structures, their relative stability, and some of the transition state (TS) structures involved in the conformational interconversion pathways were analyzed from RHF/6‐31G(d), B3LYP/6‐31G(d,p) and B3LYP/6311++G(d,p) calculations. Aug‐cc‐pVDZ//B3LYP/6311++G(d,p) single point calculations predict that the multistep conformational interconversion mechanism requires 11.07 kcal/mol, which is in agreement with the available experimental data. These results allow us to form a concise idea about the internal intricacies of the preferred forms of cyclododecane, describing the conformations as well as the conformational interconversion processes in the conformational potential energy hypersurface. Our results indicated that performing an exhaustive analysis of the potential energy curves connecting the most representative conformations is a valid alternate tool to determine the principal conformational interconversion paths for cyclododecane. This methodology represents a satisfactory first approximation for the conformational analysis of medium‐ and large‐size flexible cyclic compounds. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Electrical conductivity and luminescence in coordination polymers based on copper(I)-halides and sulfur-pyrimidine ligands

The solvothermal reactions between pyrimidinedisulfide (pym(2)S(2)) and CuI or CuBr(2) in CH(2)Cl(2):CH(3)CN lead to the formation of [Cu(11)I(7)(pymS)(4)](n) (pymSH = pyrimidine-2(1H)-thione) (1) and the dimer [Cu(II)(μ-Br)(Br)L](2) (L = 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde) (2). In the later reaction, there is an in situ S-S, S-C(sp(2)), and C(sp(2))-N multiple bond cleavage of the pyrimidinedisulfide resulting in the formation of 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde. Interestingly, similar reactions carried out just with a change in the solvent (H(2)O:CH(3)CN instead of CH(2)Cl(2):CH(3)CN) give rise to the formation of coordination polymers with rather different architectures. Thus, the reaction between pym(2)S(2) and CuI leads to the formation of [Cu(3)I(pymS)(2)](n) (3) and [CuI(pym(2)S(3))] (pym(2)S(3) = pyrimidiltrisulfide) (4), while [Cu(3)Br(pymS)(2)](n) (5) is isolated in the reaction with CuBr(2). Finally, the solvothermal reactions between CuI and pyrimidine-2-thione (pymSH) in CH(2)Cl(2):CH(3)CN at different ratios, 1:1 or 2:1, give the polymers [Cu(2)I(2)(pymSH)(2)](n) (6) and [Cu(2)I(2)(pymSH)](n) (7), respectively. The structure of the new compounds has been determined by X-ray diffraction. The studies of the physical properties of the novel coordination polymers reveal that compounds 3 and 5 present excellent electrical conductivity values at room temperature, while compounds 1, 3, and 5-7 show luminescent strong red emission at room temperature.     

A Branch and Contract Algorithm for Problems with Concave Univariate, Bilinear and Linear Fractional Terms

A new deterministic branch and bound algorithm is presented in this paper for the global optimization of continuous problems that involve concave univariate, bilinear and linear fractional terms. The proposed algorithm, the branch and contract algorithm, relies on the use of a bounds-contraction subproblem that aims at reducing the size of the search region by eliminating portions of the domain in which the objective function takes only values above a known upper bound. The solution of contraction subproblems at selected branch and bound nodes is performed within a finite contraction operation that helps reducing the total number of nodes in the branch and bound solution tree. The use of the proposed algorithm is illustrated with several numerical examples.